Passer aux informations produits
1 de 1

Vortek Products

HW97_77-PG4 STEEL TuneKit-12ft/lb

HW97_77-PG4 STEEL TuneKit-12ft/lb

Prix habituel $115.00 USD
Prix habituel Prix promotionnel $115.00 USD
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
Piston seal
Breech seal

*NEW* PG4 STEEL Tune-Kit fitting HW97 Air Rifles
QUAD-4 guides for best stability upon firing! (12FT/LB)

For HW77 smaller compression tube Seal size, please go to bottom of page **

The redesigned PRO-GUIDE4 STEEL weighted tune kit having a STEEL Body, + 2 

Performance: High Output (12FT/LB)

Power up to 12ft/lbs



(PG4) ProGuide4-STEEL drop-in Kit
High Yield valve wire open-end power spring
Triple guides with Helical 
Lubrication for damping of metal, plastic and seals 
(OPTIONAL: Vortek Vac-SEAL26) 


For Consideration when tuning power:
It is the owner's responsibility to ensure legality of their air gun power output.
Vortek’s Location of testing is 578 Feet.Above.Sea.Level. (F.A.S.L)
For every 1000ft above or below will be approximately .029 difference in velocity, thus foot-pound (Ft/lb, Joules) of shooting energy.
1000 F.A.S.L.x .029 = 29fps approx
Joules= .7475=ft/lb
Easy, do-it-yourself with virtually no pre-load force on assembly. 

**Special Note for   OLDER HW/77 air rifles having smaller compression chambers~
Your HW77 airgun serial# before 1446049 has an 25mm Compression Tube Bore!! Choose 25mm VacSEAL
We Highly recommend the install of our VacSEAL25 or 26 with the new PG4 STEEL for best damping shot cycle. 
Works will all HW trigger arrangements 
NOTE for legal limit: Vortek’s VacSEAL 25 or 26 piston seal is not required for air rifle to shoot when PG4 is installed. 

Afficher tous les détails