Shipping Estimate
Country:
Region / State:
Post Code:

button_getquote

 

DIANA 34 PG4-STEEL Tune-Kit HO

DIANA 34 PG4-STEEL Tune-Kit  HO
Product Code: PG4-78012530ocHth
Availability: In Stock
Price: $89.000

Available Options


Seal Options:

Breech Seal:

Qty:     - OR -   Add to Wish List
Add to Compare

NEW* Vortek PG4 STEEL Diana 34 tune-kit 
Not designed for the new EMS34  
Manufactured STEEL Body PRO-GUIDE4 STEEL tune kit provides another level to damping. With its  new mass, weighted rear retainment guide, stiffer beam strengh the new PG4-STEEL 4-Guide  quickly counters  movement deading spring firing noise. The Inner guide arrangment is machined slip-fitted into spring and 1 helical slip fit onto the inner, and the 4rd guide "top-Hat" has the exact spring fitting pitch allowing spring a thread like firm tighter 360 degree fit apond firing. The spring with open coils allows use of all coils for more accurate output across product line. Further, the DiY tuner has option of cuting spring for finer tuning. The new PG4-Guides have a near fit to its power grid with a heavier, stiffer guide adding mass for better sound deadening.

Introductory PRODUCT CODE discount:
D34PG4 STEEL-HO $89.00

Performance:

High-Ouput full power up to 19ft/lbs/27 Joules
*1200fps(.17cal)/390 m/s CP7.9g
*720fps(.22cal)/210m/s G14.33CP (Lead pellet) (16ft/lbs)
*950fps(.22cal)/308 m/s G9.56g (tin pellet) (19ft/lbs)
Not designed for the new EMS34  

Product Code:
PG4S78012530Hth

Contents of Tune Kit:   
  • PG4 STEEL guide module + 4 GUIDES   
  • High Yield wire power spring
  • Lubrication for metal, plastic and seals 
 Installation:
  • For Consideration when tuning power:
    It is the owners responsibility to assure legality of their air gun power output.
    Vortek’s Location of testing is 578 Feet.Above.Sea.Level. (F.A.S.L)
    For every 1000ft above or below will be approximately .029 difference in velocity, thus foot pound (Ft/lb, Joules) of shooting energy.

    1000 F.A.S.L.x .029 = 29fps approx
    Joules= .7475=ft/lb

    Easy, do-it-yourself with vIrtually no pre-load force on assembly. 
  • OPTIONAL PISTON SEAL: ProSEAL 28mm
    Vortek’s piston seal is not required for air rifle to work with PG3 installed. Optional ProSEAL28 normally increases velocity.
    and more shot damping properties then OEM seal.

    (Does not fit the new Diana34 EMS air rifle)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

NEW* Vortek PG4 STEEL Diana 34 tune-kit 
Not designed for the new EMS34  
Manufactured STEEL Body PRO-GUIDE4 STEEL tune kit provides another level to damping. With its  new mass, weighted rear retainment guide, stiffer beam strengh the new PG4-STEEL 4-Guide  quickly counters  movement deading spring firing noise. The Inner guide arrangment is machined slip-fitted into spring and 1 helical slip fit onto the inner, and the 4rd guide "top-Hat" has the exact spring fitting pitch allowing spring a thread like firm tighter 360 degree fit apond firing. The spring with open coils allows use of all coils for more accurate output across product line. Further, the DiY tuner has option of cuting spring for finer tuning. The new PG4-Guides have a near fit to its power grid with a heavier, stiffer guide adding mass for better sound deadening.

Introductory PRODUCT CODE discount:
D34PG4 STEEL-HO $89.00

Performance:

High-Ouput full power up to 19ft/lbs/27 Joules
*1200fps(.17cal)/390 m/s CP7.9g
*720fps(.22cal)/210m/s G14.33CP (Lead pellet) (16ft/lbs)
*950fps(.22cal)/308 m/s G9.56g (tin pellet) (19ft/lbs)
Not designed for the new EMS34  

Product Code:
PG4S78012530Hth

Contents of Tune Kit:   
  • PG4 STEEL guide module + 4 GUIDES   
  • High Yield wire power spring
  • Lubrication for metal, plastic and seals 
 Installation:
  • For Consideration when tuning power:
    It is the owners responsibility to assure legality of their air gun power output.
    Vortek’s Location of testing is 578 Feet.Above.Sea.Level. (F.A.S.L)
    For every 1000ft above or below will be approximately .029 difference in velocity, thus foot pound (Ft/lb, Joules) of shooting energy.

    1000 F.A.S.L.x .029 = 29fps approx
    Joules= .7475=ft/lb

    Easy, do-it-yourself with vIrtually no pre-load force on assembly. 
  • OPTIONAL PISTON SEAL: ProSEAL 28mm
    Vortek’s piston seal is not required for air rifle to work with PG3 installed. Optional ProSEAL28 normally increases velocity.
    and more shot damping properties then OEM seal.

    (Does not fit the new Diana34 EMS air rifle)

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Related Products

Powered By OpenCart
Vortek Products Inc. © 2021 - Opencart Themes by Yoocart.net