Shipping Estimate
Country:
Region / State:
Post Code:

button_getquote

 

HW80/R1-PG4 STEEL HO Tune Kit

HW80/R1-PG4 STEEL HO Tune Kit
Product Code: 865148-26.5Hth
Availability: In Stock
Price: $99.000

Available Options


Seal Options:

Breech Seal:

Qty:     - OR -   Add to Wish List
Add to Compare

*NEW* PG4 ''STEEL" Tune-Kit (22FT/LB)
TUNE APPLICATION:
Drop-in Pro-GUIDE4s Tune Kit fitting HW80 and Beeman R1 Air Rifles

Note: Price $109 
Introductory price $99.00

***New, Redesigned PRO-GUIDE4s STEEL weighted tune kit having a STEEL Body provides another level of power performance.
A THICKER, heavier machined Steel outer-guide that brings beam strength IN-LINE quickly dampend shot harmonics with two synthetic internal damping guides. Both near equal length including our NEW machined INTERNAL HELICAL GUIDE Guide + an HELICAL GUIDE Seat' slip fitted into a high-yield, open-coil spring wire. This design allows use of both end coils for more accurate power output across same product line. As well as providing the user an easier cocking effort at full power output!  This kit eingineered for all calibers small and large, old and new HW80 and R1 air rifles. Will not over shoot older warn tolerance of compression tube. We also offer custom mfg spring coil count, more or less power output at no addition cost. ~Very quick, liner firing movement consistent deviations shot after shot. EZ installation!

Performance: High Output (HO)
High-Ouput full power up to 22ft/lbs+
Test conducted with Vortek VacSEAL30 installed

815fps (22 cal) 247m/s 14.35g/JSB (Lead pellet) 21ft/bs!
1010fps(22 cal) 305m/s 9.56g (Tin pellet) 22FT/LB
(.17 Calibre)~1040fps 315 m/s CP7.9g


Product Code: PG4-HW80865148-26.5Hth
(Mfg date as of 21/09)
 Content:
  • (PG4sProGuide4-STEEL drop-in Kit
  • High Yield valve wire open-end power spring
  • 4x Guides having 2 Helical 
  • Lubrication for damping of metal, plastic and seals 
  • (Highly Recommed Vortek Vac-SEAL30) optional
 Installation: 
  • For Consideration when tuning power:
    It is the owners responsibility to assure legality of their air gun power output.
    Vortek’s Location of testing is 578 Feet.Above.Sea.Level. (F.A.S.L)
    For every 1000ft above or below will be approximately .029 difference in velocity, thus foot pound (Ft/lb, Joules) of shooting energy.

    1000 F.A.S.L.x .029 = 29fps approx
    Joules= .7475=ft/lb

    Easy, do-it-yourself with vIrtually no pre-load force on assembly. 
  • Works will all HW trigger arrangements 
    OPTIONAL:
    NOTE for legal limit: Vortek’s VacSEAL30 piston seal is not required for air rifle to work with PG4 installed. However, for best shooting results with less noise higher velocities, reccommend Vortek VacSEAL30.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

*NEW* PG4 ''STEEL" Tune-Kit (22FT/LB)
TUNE APPLICATION:
Drop-in Pro-GUIDE4s Tune Kit fitting HW80 and Beeman R1 Air Rifles

Note: Price $109 
Introductory price $99.00

***New, Redesigned PRO-GUIDE4s STEEL weighted tune kit having a STEEL Body provides another level of power performance.
A THICKER, heavier machined Steel outer-guide that brings beam strength IN-LINE quickly dampend shot harmonics with two synthetic internal damping guides. Both near equal length including our NEW machined INTERNAL HELICAL GUIDE Guide + an HELICAL GUIDE Seat' slip fitted into a high-yield, open-coil spring wire. This design allows use of both end coils for more accurate power output across same product line. As well as providing the user an easier cocking effort at full power output!  This kit eingineered for all calibers small and large, old and new HW80 and R1 air rifles. Will not over shoot older warn tolerance of compression tube. We also offer custom mfg spring coil count, more or less power output at no addition cost. ~Very quick, liner firing movement consistent deviations shot after shot. EZ installation!

Performance: High Output (HO)
High-Ouput full power up to 22ft/lbs+
Test conducted with Vortek VacSEAL30 installed

815fps (22 cal) 247m/s 14.35g/JSB (Lead pellet) 21ft/bs!
1010fps(22 cal) 305m/s 9.56g (Tin pellet) 22FT/LB
(.17 Calibre)~1040fps 315 m/s CP7.9g


Product Code: PG4-HW80865148-26.5Hth
(Mfg date as of 21/09)
 Content:
  • (PG4sProGuide4-STEEL drop-in Kit
  • High Yield valve wire open-end power spring
  • 4x Guides having 2 Helical 
  • Lubrication for damping of metal, plastic and seals 
  • (Highly Recommed Vortek Vac-SEAL30) optional
 Installation: 
  • For Consideration when tuning power:
    It is the owners responsibility to assure legality of their air gun power output.
    Vortek’s Location of testing is 578 Feet.Above.Sea.Level. (F.A.S.L)
    For every 1000ft above or below will be approximately .029 difference in velocity, thus foot pound (Ft/lb, Joules) of shooting energy.

    1000 F.A.S.L.x .029 = 29fps approx
    Joules= .7475=ft/lb

    Easy, do-it-yourself with vIrtually no pre-load force on assembly. 
  • Works will all HW trigger arrangements 
    OPTIONAL:
    NOTE for legal limit: Vortek’s VacSEAL30 piston seal is not required for air rifle to work with PG4 installed. However, for best shooting results with less noise higher velocities, reccommend Vortek VacSEAL30.

Reviews (3)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Related Products

Powered By OpenCart
Vortek Products Inc. © 2021 - Opencart Themes by Yoocart.net